Subliming ablators
Ablative materials in design and construction, are materials that are generally resistant to high temperatures in one of three ways and used for thermal protection. Subliming ablators perform through sublimation and eventual melting.
Subliming ablators, act as heat sinks until the surface of the material reaches sublimation or melting point (thus also referred to as - subliming / melting ablators), thus removing the heat from the protected object. In some cases a layer of gas is formed which helps remove heat from the object, in other cases an endothermic reaction occurs increasing the material temperature whilst decreasing the surrounding temperature, sacrificially.
In doing this ablative materials may pyrolyse mitigating a heat load, so in effect they decompose or change as a result of the heat being applied. For example ablative coating might contain hydrates, as they are heated, they decompose, and water vapour is released, this has a cooling effect, the insulation characteristics of the charred remains after the water is vaporised can slow the heat transfer. These types of materials are also often carbon related composites such as Teflon.
Two other types of related ablative materials are charring ablators and Intumescent ablators.
[edit] Related articles on Designing Buildings
Featured articles and news
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
Comments
[edit] o make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.